Okay, this DIY is to help you through the process of updating Smarty to either the Revo or TNT software. It's not a plug and play device and can be a bit frustrating the first time you do it.
It is HIGHLY advised to return your truck to STOCK settings before installing a new program onto Smarty.The first thing you need to do is visit MADS website and download the appropriate files for the update.....
http://www.madselectronics.com/DownloadS06A.htmlHere are all the links to the downloads for the Smarty S06, 03 - 07 trucks. It took me a while to figure it out the first time:
First, you need the driver installation guide (instructions).....
http://www.madselectronics.com/downloadfiles/USBDriverinstallation.pdfThen you need the driver itself.....
http://www.madselectronics.com/downloadfiles/CDM_2.00.00.zipThen you need the actual program itself to load the Revo software.....
http://www.madselectronics.com/downloadfiles/SmartyUSB.exeLastly, you need WinRAR to unzip the Revo.7z file you downloaded. The unzipped file is what the SmartyUSB loads onto the Smarty.....
http://internap.dl.sourceforge.net/sourceforge/sevenzip/7z457.exeNext, you need to follow the instructions for the driver installation in the guide. Follow these closely! If you do not, you will be pulling your hair out. The pictures below are extracts from the Driver Installation Guide.....
Now that we have downloaded and installed the driver, we need to download and extract the tune (Revo or TNT) that we want to use.
Once the file is downloaded, it needs to be extracted with WinRAR. This is a free download, just google it and you'll find the program....
Once the file is extracted, we need to install it on the Smarty. See the pictures below.....
You only have to go through this long process once.
Once the driver is installed, all you need to do in the future is download and extract the file that you want to use, plug in smarty and run the program to install the new tune.