Dodge Owner Forums

Dodge Trucks => 2nd Gen Rams => Topic started by: Moparpower151 on October 23, 2009, 07:49:44 pm

Title: *Firemission* Cheapst Cold Air Intake
Post by: Moparpower151 on October 23, 2009, 07:49:44 pm: Help me find it for a friend who is about to do his first mod. :gunsmilie:

2001 Cummins 2500 2wd 5.9l 24valve, any brand.
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: lilfroger on October 23, 2009, 07:53:13 pm: For what year...what motor...what truck??
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Cumminalong on October 23, 2009, 07:53:47 pm: Quote from: Moparpower151 on October 23, 2009, 07:49:44 pm
Help me find it for a friend who is about to do his first mod. :gunsmilie:

Uhhhh, what's it going on....... :scratch:

Year, model, engine.
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Moparpower151 on October 23, 2009, 07:56:48 pm: :lol:
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Cumminalong on October 23, 2009, 08:01:08 pm: Does he just want cheap or good?
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Moparpower151 on October 23, 2009, 08:03:57 pm: any options under 150
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Cumminalong on October 23, 2009, 08:07:06 pm: Quote from: Moparpower151 on October 23, 2009, 08:03:57 pm
any options under 150

:lol:

I've got a stock air box that I can cut holes in..........
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Cumminalong on October 23, 2009, 08:10:14 pm: You've got a PM.
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Cumminalong on October 23, 2009, 08:25:40 pm: Just sent ya another option.
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Moparpower151 on October 23, 2009, 08:44:15 pm: Where can I get 3 inch exhaust pipe at cost? Shops want 60+ to pop in a straight pipe and we know someone with a welder
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Cumminalong on October 23, 2009, 08:46:13 pm: How long of a section do you need?
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Moparpower151 on October 23, 2009, 08:56:13 pm: 32 inches
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Cumminalong on October 23, 2009, 09:39:56 pm: Does either end need to be flared or do you just want straight stock.
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Cumminalong on October 23, 2009, 09:46:17 pm: You've got mail again.......

;D
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Moparpower151 on October 23, 2009, 09:48:39 pm: both ends flared
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Cumminalong on October 23, 2009, 09:50:05 pm: Okay, so you're accounting for at least 2" of overall then, right?
Title: Re: *Firemission* Cheapst Cold Air Intake
Post by: Scott91370 on October 24, 2009, 03:27:34 am: Look up Terry's tire in Burleson. I went in one day and needed a couple of bends is a piece of 2.5" pipe (needed the pipe too). Total length was about 24". Went in and the guys says: What's it worth? I left paying $15. They've done a few small things like that for me and always seem reasonable (a couple of times free knowing I would be back).

If you head down this way, let me know!