I just got home from my weekend trip, I went to get the axles, and sadly found out that they are only 3.55 gears and not 4.10s, but being that the front dana 60 is worth about 800 alone, I still bought them. The rear was a 70, the guy was convinced that it was a 60, even though i showed him the stamp on the housing. But it's a done deal. As for the rear, my buddy has the stock 3/4 block and leafs from his old 98 12v. And he said i could have them. So i'm gonna mess around with the idea of stiffening up the rear of the truck with the heavier leafs, or get some 1/2 ton spring pads and weld them onto the new axle. I'm gonna kinda clean them up and get new brakes for them before i put them under the truck, so i have some time to figure out what i want to do with the springs. Now if i could just find a 12v, nv4500, and a transfer case, i'd be all set for the project on the truck.