Smarty UDC - EFI Light?

[rasteck]

Something new for the VP trucks (hopefully)!! I'm kinda excited anyway.

http://madselectronics.com/downloadfiles/SmartyUDCSoftware.pdf

"-The first release will be for the S06PoD ( Covers the 5.9L CR from 2003 to 2007). The SSR version is in the works and will follow shortly after the initial release. All other versions for the VP and 6.7L trucks will follow ASAP. It's a lot of work..."




Sent from my iPhone using Tapatalk

[Smitty]

Ummmh...Interesting.

[FroneDaddy]

Looks like the only new parameter for the S06 is duration...

For the CR 5.9L these engine operation parameters are :
1) Duration (how long the fuel is injected->The fuel quantity.)
2) Timing (when the fuel is injected in relation to the TDC)
3) Rail Pressure
4) Wastegate opening pressure (where applicable)
5) Torque management (more or less sensitive throttle)

Sounds like a lot of hype for nothing.

[04cumminsram]

The new software adds 1 catcher level which is the Udc... When you read out the file you can go in and fine tune those specific areas to what your truck needs after data logging and such.

[Cumminalong]

Not holding my breathe.

It's only addressing the base tables, a total of 5.

Those base tables are then modified by the air density ables which are not addressed at all.

Gonna be more hype like SSR.