"Perform Service" CCV filter message reset procedure

[Mitch]

1. Turn the ignition switch to the ON position (Do not start engine).
2. Press and release the brake pedal two times.
3. Fully depress the accelerator pedal slowly two times within 10 seconds and hold it to the floor the second time.
4. Turn the ignition switch to the OFF/LOCK position and then let up on the accelerator pedal.

[NickBeek]

Don't forget to stand on one leg and rub your belly and head in a circular motion at the same time!

[Mitch]

I didn't have enough room in the cab for that

[Buford445]

Don't forget to stand on one leg and rub your belly and head in a circular motion at the same time!

 

[ERT]

Don't forget to stand on one leg and rub your belly and head in a circular motion at the same time!

No ,no ,no.... It's pat your head and rub your belly at the same time! Now you have to start all over again   

[Jims1dodge]

Don't forget to stand on one leg and rub your belly and head in a circular motion at the same time!

No ,no ,no.... It's pat your head and rub your belly at the same time! Now you have to start all over again   

Still wrong-- You forget to buckle and unbuckle your seat belt 3 times in 5 seconds 

[JetNoise]

Don't forget to stand on one leg and rub your belly and head in a circular motion at the same time!

No ,no ,no.... It's pat your head and rub your belly at the same time! Now you have to start all over again   

Still wrong-- You forget to buckle and unbuckle your seat belt 3 times in 5 seconds 

And the seat belt must fully retract between each buckling.

[NickBeek]

Don't forget to stand on one leg and rub your belly and head in a circular motion at the same time!

No ,no ,no.... It's pat your head and rub your belly at the same time! Now you have to start all over again   

Still wrong-- You forget to buckle and unbuckle your seat belt 3 times in 5 seconds 

And the seat belt must fully retract between each buckling.

Most importantly..... this procedure must be done on the first night of the full moon!

[Mitch]

This was "supposed" to be an informative thread on how to reset the message....

[JetNoise]

But when have we ever done what we are "supposed" to? (Or even kept a thread on topic, for that matter?)

[Mitch]

Lol Valid point.

[Cumminalong]

[NickBeek]

What? You got the info out there before the train wreck....

[1ACarlos]

Thanks for the instructions

[Jasont1982]

I have a 2012 3500 with the 6.7 and 32,000 miles. The CEL came on, had the codes scanned at autozone and showed the CCV filter. The old filter was saturated with oil, so replaced it with a new filter, and the CEL light is staying on. Tried the pedal dance reset and unhooked batteries, and the CEL is still on.