I was on my way to go eat I parked by the restaurant and tried to roll the window up but it wouldn't go. I looked in the owners manual it says there is a circuit breaker but I didn't see a fuse. The passenger window still works so I assume that the breaker is ok I could be wrong.
I took the switch out to see if it is the problem. This is what I tested so far (diagram below)
#'s 1 2 3 4 always have continuity
4 + 6 have continuity while pass switch is in up position.
3 + 6 have continuity while pass switch is in the down position.
5 has continuity with 1 2 3 and 4 with no buttons pushed, but The connection is broken with all when the drivers side is in the up position.
pushing the driver side to the down position has no effect
I'm thinking that the switch is stuck in the down position, so that needs to be replaced.
Can anyone tell me how to jump out the switch to get the window to go up? Also to test to see if the switch being on for the 20 mins it took to drive home fried the motor.
Is there a fuse that may have blown or could the breaker be bad?
Its snowing here I had to pull 3 the bolts that were between the speaker and door handle so I could push the window up I duct taped it so it would stay there
I'm gonna try to get the switch tomorrow and start there. Once again thanks in advance
Brian