These are the steps needed to change out the front lamps on 3rd gen Rams.
Tools Needed: 3/8" ratchet w/ a 6" wobble head ex. & reg. 3" ex., 10mm deep & shallow sockets, & a medium sized screwdriver.
Lamps needed: Varies on model year.
Remove the rubber access plug (located inside of front fender well) ,use the 6" wobble head extension and deep 10mm socket to remove the nut:
Use a 3" ex. and shallow 10mm socket, and remove the 2 bolts:
Then pull the assembly out:
The green plug is the headlamp, the pink one is the turn/parklamp, and the white one is the clearance lamp.