Also the ASD fuse is good checked it several times and installed a new fuse just in case.. I did find one fuse that is popped it was for the cig lighter.. Maybe I can still charge him for the 5 hours of repair LOL no i can't do that...
I checked all grounds and the ground with at the O2 sensor all is good... I did some thinking about this..
Can you get the wires crossed with bank one and two.. Although I never took the harness out.. What if someone else did.. I am so worried about bank 2 when I unplugged the 2/2 sensor I never looked to see what the other ones was doing at that time
The test I was doing was start truck run for 5 minutes and then see what the o2 sensor reads lower then 1.5 volts
Yes replace O2 sensor
no go to step two NO it was at 3.9
unplug sensor and then start engine o2 sensor higher then 1.5 volts
yes go to step three
no (do something i forgot what it was) but it was yes it was at 4.2
then ohm out wire #33 Well I never could really find wire #33 so I checked all plugs With no luck of finding it...
So I moved to the ASD fuse and stuff I guess I will back up to finding the correct wire and plug in the morning.. But I have a boss that Wont stay off my
back I'd like to tell him to get the
out and leave me alone..