270799 Posts in 19739 Topics - by 1830 Members - Latest Member: Simplesimon

Hello Guest
Show unread posts since last visit.
Show new replies to your posts.

Author Topic: Head Lamp/Turn Signal/Clearance Lamp How To  (Read 1777 times)

Offline MTDODGE

  • Newbie
  • *
  • Posts: 19
  • Awards:
    100K
Head Lamp/Turn Signal/Clearance Lamp How To
« on: August 01, 2008, 09:10:06 pm »
These are the steps needed to change out the front lamps on 3rd gen Rams.

Tools Needed: 3/8" ratchet w/ a 6" wobble head ex. & reg. 3" ex., 10mm deep & shallow sockets, & a medium sized screwdriver.
Lamps needed: Varies on model year.
Remove the rubber access plug (located inside of front fender well) ,use the 6" wobble head extension and deep 10mm socket to remove the nut:





Use a 3" ex. and shallow 10mm socket, and remove the 2 bolts:





Then pull the assembly out:





The green plug is the headlamp, the pink one is the turn/parklamp, and the white one is the clearance lamp.
Stock Holset CAT Delete Aero Turbine Muffler ATS 5* TC Airaid Baffle Delete Superchips Pyro/Boost w/ Autometer Oil Pressure & Transmission Temp Gauges MagHytec Transmission Pan EZ Down Westin Nerf Bars Spray In Bed Liner

 

Questions, Concerns, Comments? Contact DOF Administrators
DodgeOwnerForums.com is not affiliated with Chrysler Group, LLC or Cummins, Inc